產品特點

Product Features

1、管道離心泵結構緊湊，機泵一體化，體積小。其立式結構具有安裝占地面積小，運行平穩，安裝無需調整。

The pipeline centrifugal pump has a compact structure, integrated machine and pump, and small volume. Its vertical structure has the advantages of small installation area, smooth operation, and no need for adjustment during installation.

2、泵進出口設計成規格相同法蘭，且位于同一中心在線，可象閥門一樣直接安裝在管路上，且中心低，便于管道布置，安裝方便。

The pump inlet and outlet are designed with flanges of the same specification and located on the same centerline. They can be directly installed on the pipeline like valves, and the center is low, making it easy for pipeline layout and installation.

3、泵與電機同軸，軸向尺寸短，使泵運行更加平穩，噪音低。

The pump is coaxial with the motor, with a short axial size, making the pump run more smoothly and with low noise.

4、改變傳統軸封方式，避免了輸送介質的外泄，因此具有完全無泄漏的顯著特點。

By changing the traditional shaft sealing method and avoiding the leakage of the conveying medium, it has a significant feature of completely leak free.

產品用途

Product Usage

1.管道離心泵適用于高層建筑增壓送水、園林噴灌、冷卻塔上水、遠距離輸水、空調、制冷沖洗、浴室等冷；暖水循環加壓。

Pipeline centrifugal pump is suitable for pressurized water supply in high-rise buildings, garden sprinkler irrigation, cooling tower water supply, long-distance water supply, air conditioning, refrigeration flushing, bathroom and other cooling; Warm water circulation pressurization.

2.管道離心泵適用于采暖、鍋爐等行業的高溫?zé)崴鰤貉h(huán)。

 Pipeline centrifugal pumps are suitable for high-temperature hot water pressurization circulation in industries such as heating and boilers.

3.管道離心泵適用于輸送食品、制藥、造酒、化工等行業的工藝流程中腐蝕性介質.

Pipeline centrifugal pumps are suitable for transporting corrosive media in the process flow of industries such as food, pharmaceuticals, liquor making, and chemical engineering

4.管道離心泵適用于輸送無腐蝕性液體，有甲烷或煤礦井下固定設備I類及工廠IIA、II B級，溫度組別為T1、T2、T3、T4組存在爆炸性混合物的其它工業場所。

Pipeline centrifugal pumps are suitable for conveying non corrosive liquids, such as methane or fixed equipment in coal mines, Class I and factory IIA and IIB, and other industrial sites with explosive mixtures in temperature groups T1, T2, T3, and T4.

.建議使用溫度低于100°C

Suggest using temperatures below 100 ° C

維護 Maintenance 

運行中的維護

Maintenance during operation

(1)進口管道必須充滿液體，禁止泵在汽蝕狀態下長期運行。

The inlet pipeline must be filled with liquid and it is prohibited for the pump to operate for a long time in a cavitation state.

(2)定時檢查電機電流值，不得超過電機額定電流。

Regularly check the motor current value and do not exceed the rated current of the motor.

(3)泵進行長期運行后，由于機械磨損，使機組噪音及振動增大時，應停車檢查，必要時可更換易損零件及軸承，機組大修期一般為一年。

After long-term operation of the pump, if the noise and vibration of the unit increase due to mechanical wear, it should be stopped for inspection. If necessary, vulnerable parts and bearings can be replaced. The overhaul period of the unit is generally one year.

機械密封維護

Mechanical seal maintenance

(1)機械密封潤滑應清潔無固體顆粒。

 The lubrication of mechanical seals should be clean and free of solid particles.

(2)嚴禁機械密封在干磨情況下工作。

Mechanical seals are strictly prohibited from working under dry grinding conditions.

(3)起動前應先盤動泵(電機)幾圈，以免突然起動造成石墨環斷裂損壞。

Before starting, the pump (motor) should be turned a few times to prevent sudden starting from causing damage to the graphite ring.

(4)密封泄漏量允許3滴/分。否則應檢查。

The allowable leakage rate for sealing is 3 drops per minute. Otherwise, it should be checked.